CN /English

Product Center

MS6812 Cable&Wire Tracker Tester

Cable&Wire Tracker Tester

This instrument was an applied tool, which was widely used in the communication system, computer network and other metal circuit by the technical staff in the field of communication installation and engineering maintenance.

Track RJ45/BNC and RJ11 cable directly/track other wire through the adapter/no need to strip off cable sheath, which is easy and quick to judge the location of break point in cable.

Test the working status of telephone line (idle, ringing, and off-hook) and judge TIP or RING line

Only used for DC level test.


Features:

Judging whether the continuous cable line.

Tracking cable line, and the discrimination of the circuit breaker points.

Receiving the cable lines (telephone line) of the audio signal.

The telephone line to judge the work in the state (idle, ringing, off hook).

The transmitter audio signal can lead to the target cable line.

Functions:
Cable hunting: Directly hunt the cable with RJ11, RJ45 and BNC terminal and other metal leads through adaptor
When cable is hunted, there is no need to strip off cable sheath, which is easy and quick to judge the location of breakpoint in cable
It can directly hunt cable when weak current equipment is turned on, such as Ethernet switch, router
Test network cable: It can fully test the line sequence of network cable, open circuit, short-circuit, miswire, reverse connection and splitpattern
Test line level, positive and negative polarity
Test the status of telephone line: It can test the working status of telephone line (idle, ringing, and off-hook) and judge TIP or RING line
Check lead continuity
Test the connection between network cable and switch port
It provides low voltage prompt function and the receiver has installed spotlight


Specifications:

Features

Wire track

directly track wire type: RJ45,RJ11

Track other wire through the attachment

sequence collation

Open circuit, short circuit, detection of cable line sequence

Network wire collation

Test device used with UTP (Unshield Twisted Pair) and STP (Shield twisted Pair) wiring

Tests for open circuits, shorts, miswires, reversals, and split pairs

Allow one person to test T568A, T568B, 10Base-T, and Token Ring

DC level test

DC level test

telephone line test

Identify the state of working telephone line(clear,ringing,busy)

Continuity

Judge continuity of the cables or wires

Switch port collation

detection switch connected condition

General

Power Supply

Receiver: 9V 6F22 Battery

Emitter:3x1.5V AA

Product Size

Receiver:212mmx45mmx28mm

Emitter:120mm x66mm x31mm

Product Weight

Receiver:120g;    Emitter:160g

Category

CE CAT.III 300V RoHS

● Test Cable (MS6816 two ends RJ11 Plug+ 6 Core flat cable/ total 180mm) x1

● Test Cable (MS6816 two ends RJ11 Plug+ 6 Core flat cable + Alligator Clip (Red & black) Total length 200mm) x 1● Earphone cable x 1

● Gift Box x 1

● Portable bag x 1

● Plastic Bag x 1

● Manual x 1

● Battery (PPPVCS9VE012/9V ) x 1

● Battery (AA/1.5V Manganese Battery) x 3

  • MS6812 Users Manual

Copyright © 2015 Peakmeter Instrument Co., Ltd. Shenzhen City, Technical support:CTMON